Home » Warehouse and Industrial Pressure Washing
Warehouse and Industrial Pressure Washing
Jet Set Pro provides industrial pressure washing for warehouses, factories, loading docks, hardstand yards and car parks across the Gold Coast, South Brisbane and the Tweed. We run vehicle-mounted hot water units, capture every litre of run-off, and work seven days a week including after hours, so your site gets cleaned without stopping production. Call 0482 702 903 for a free, no-obligation quote.
Hot water on every truck
Run-off captured
7 days, including after hours
Why warehouse floors and yards need more than a hose
A warehouse floor takes a beating that a driveway never will. Forklift tyres lay down black rubber on every turn. Hydraulic fluid and engine oil drip from pallet jacks and delivery trucks. Loading docks collect diesel soot, spilt product and the mud that comes in on every tyre during a wet week. Out in the yard, the Gold Coast's humidity grows mould and algae across hardstand within a season.
Left alone, that build-up costs you three ways.
Oily patches and algae are slip hazards for staff and visitors, which makes them a WHS issue before an appearance issue.
Grime that sits on concrete for months works into the pores and becomes far harder to lift later.
And a stained site is the first thing a client, auditor or prospective tenant sees when they pull up.
A domestic pressure washer will not fix it. Cold water pushes grease around rather than removing it, and a wand leaves tiger stripes across a big floor. Industrial pressure washing uses hot water, commercial flow rates and a wide surface cleaner to lift the contamination evenly and take it away.
What our industrial pressure washing service includes
Every site is different, so we scope the job on a walk-through first, a site meeting is arranged to allow us the opportunity to assess the individual site. The areas we most commonly clean are:
Warehouse pressure washing (internal floors)
Open floor areas, aisles between racking and the apron inside the roller doors. A surface cleaning unit gives an even finish, and hot water breaks down forklift rubber, oil and grease. Run-off is contained and pumped out rather than left to pool against the racking.
Loading docks, forecourts and hardstand
The dirtiest parts of most sites and the most visible. Diesel residue, tyre marks, spilt product and mould all respond well to hot water at commercial pressure. Stubborn oil patches get a degreaser pre-treatment before the main clean. For smaller internal slabs, see our garage floor cleaning page.
Car parks and staff parking areas
Oil drips, tyre marks and gum across open-air and undercover car parks. Line marking is cleaned, not blasted off.
Building exteriors, awnings and signage
Rendered walls, Colorbond cladding, tilt panels and shopfront signage. Where the surface is painted or coated, we switch to soft washing so the finish is not damaged. Our commercial pressure cleaning page covers these in more detail.
Bins, bin pads and waste areas
The spot most sites forget until there is a smell or a pest complaint. Hot water combined with our specialised blend of surfactants, degreaser and sanitising solutions deals with the grease and organic matter that cold water alone cannot shift.
Need a warehouse floor, dock or yard cleaned? Call 0482 702 903 or request a free quote online.
Request a free quote
Why hot water matters on industrial sites
Hot water is the single biggest difference between an industrial pressure washing unit and a store-bought unit. Oil, grease and rubber are bonded to the concrete, and heat softens that bond so the pressure can actually lift it. Combining our degreaser with the hot water wash means a successful outcome every time. Cold water at the same pressure mostly moves the grease to a new spot.
Our water is heated on the truck with an instantaneous burner, so there is no drop-off in heat part way through a big floor. That means a quicker job, less chemical, and a surface that stays cleaner for longer.
What to expect when you book
1
Site walk-through and fixed quote.
We look at the surfaces, contamination, drainage and access, then send a fixed price. No hourly surprises.
2
Scheduling around your operation.
Evenings, weekends and public holidays are available. For a working warehouse we often clean section by section so you keep trading.
3
Containment first.
We bund the stormwater outlets and low points before any water hits the ground.
4
Pre-treatment and clean.
Heavy oil and grease get a degreaser and dwell time, then the hot water surface clean and detail work around edges, bollards and racking feet.
5
Run-off removed and site handed back.
Waste water is pumped out and disposed of properly. On a warm Gold Coast day a sealed slab is usually dry within the hour.
Why Gold Coast warehouses choose Jet Set Pro
Run-off is captured, every time.
Allowing oily or detergent-laden wash water into stormwater is an offence under Queensland's Environmental Protection Act 1994. We bund and pump everything so nothing reaches the drains.
Hot water on every truck.
Not an optional extra. It is how we get grease off concrete.
Available 7 days, including after hours.
Trading hours are 7:30am to 6:00pm Monday to Saturday and 10:00am to 5:00pm Sunday, with after-hours work arranged by quote.
Family-owned and local.
Based in Nerang, covering Banora Point to Beenleigh. The person who quotes your job is the person who turns up.
Fully insured, fixed pricing.
You know the total before we start.
Jet Set Pro holds a 5.0 Google rating across more than 40 reviews, many from body corporate, strata and commercial clients. Read them on our reviews page.
Where we provide industrial cleaning on the Gold Coast and beyond
We are centrally located and our commercial services see us operate in all major commercial zones across the Gold Coast, South Brisbane and the Tweed, including the areas below.
Gold Coast: Southport, Surfers Paradise, Broadbeach, Robina, Varsity Lakes, Mudgeeraba, Burleigh Heads, Palm Beach, Currumbin, Elanora, Hope Island, Helensvale, Nerang, Mermaid Waters, Miami, Runaway Bay, Labrador, Oxenford, Pacific Pines and Highland Park.
South Brisbane and Logan: Beenleigh, Eagleby, Ormeau, Ormeau Hills, Pimpama, Coomera, Upper Coomera, Jacobs Well, Stapylton, Yatala, Woongoolba and Cedar Creek.
Tweed Shire: Banora Point, Tweed Heads, Tweed Heads South, Tweed Heads West, Coolangatta, Bilambil Heights, Terranora, Chinderah, Kingscliff, Cabarita Beach, Pottsville and Murwillumbah.
Jet Set Pro Exterior Cleaning Solutions, Unit 27A/64 Gilston Rd, Nerang QLD 4211. Phone 0482 702 903.
Ready to get your warehouse, dock or yard cleaned properly? Call 0482 702 903 or request your free quote online. We service industrial sites across the Gold Coast, South Brisbane and the Tweed, seven days a week.
Frequently Asked Questions
Can you pressure wash our warehouse while it is still operating?
Yes. For a working warehouse we usually clean in sections, cordoning off one bay or aisle at a time so forklifts and staff keep moving. If you would rather have the whole floor done in one go, we schedule evenings, weekends or a shutdown day, and confirm the plan with your site manager before we arrive.
What happens to the dirty water from the clean?
We bund the stormwater grates and low points before we start, then pump the waste water out and dispose of it properly. Nothing goes down the drain. Letting oily or detergent-laden wash water reach stormwater is an offence under the Environmental Protection Act 1994, and the site owner can be the one fined.
Can you remove old oil stains from a loading dock?
Yes, but old stains need more work than fresh ones. Oil that has sat for months has soaked into the concrete, so we pre-treat it, let the degreaser dwell, then hot-wash it. Most old stains fade to a faint shadow or disappear completely. We give you an honest read on the likely result during the quote.
How often should an industrial site be pressure washed?
For most Gold Coast warehouses and yards, every 6 to 12 months keeps on top of oil, tyre marks and mould. Busy loading docks and bin areas often need attention every 3 to 6 months. Building exteriors are usually fine every 12 to 24 months. We can set up a recurring schedule so it is one less thing on your list.
